Model GW Series Bending Testing Machine
Product Description
Application & Features:
The steel bar bend testing machine can be used to do bend and reverse bend test on plane. It is an important equipment to test the recurvating character of screw thread steel bar in steel factory and architectural company. It can be used to bend the steel bar on-site so that test and construct can be done in one machine.
The testing machine has many advantages, such as small size, compact structure, easy operation, low noise, smooth and steady running, directly bend angle display and easy lubricating, especially reasonable design of limit position and easily damaged parts, so it has a long using time.
Applied Standards
ISO 15630-1, ISO 6935-2, ASTM A615, ASTM A615 A615M-09B, BS 4449, GB1499.2-2007
Main Parameters
Model |
GW-40B |
GW-50B |
Range of bend steel bar’s diameter |
φ6-φ40mm |
φ6-φ50mm |
Angle of steel bar bend test |
0°-180°at will |
0°-180°at will |
Angle of steel bar reverse bend test |
0°-180°at will |
0°-180°at will |
Rotating speed of working plate |
≤ 3.7 r/min |
≤ 3.0 r/min |
Distance of roller center |
165mm |
230mm |
Distance of roller center |
φ580mm |
φ860mm |
Motor power |
1.5KW, 3-phase, 380V, 50Hz/60Hz (Or specified by users) |
3KW, 3-phase, 380V, 50Hz/60Hz (Or specified by users) |
Host size |
L*W*H=1050×750×1200mm |
L*W*H=1460×1200×1200mm |
Weight |
750KG |
1700KG |
PRODUCTS
- Electromechanical UTM
- Hydraulic UTM
- Impact Testing Machine
- Fatigue Testing Machine
- Torsion Testing Machine
- Compression Testing Machine
- Bending Testing Machine
- Relaxation Testing Machine
- Creep Testing Machine
- Cupping Testing Machine
- Wood Testing Machine
- Spring Testing Machine
- Friction and Wear Testing Machine
- Plastic Rubber Testing Machine
- Upset Testing Machine
- Customized Testing Machine
- Tensile Sample Preparation
- Testing Machine Accessories
- Hardness Tester
- Hardness Block
- Metallurgical equipment
- Portable Testing Instrument