Model WAW-3000E Computer Control Servo Hydraulic Universal Testing Machine
Category: Hydraulic UTM  Publish Time: 2021-11-21 23:27 
Model WAW-3000E Computer Control Servo Hydraulic Universal Testing Machine

 

Model WAW-3000E Computer Control Hydraulic Universal Testing Machine

 

Usage:

This 3000kN Computerized Servo Hydraulic Universal Testing Machine is used for tensile strength and

elongation test of metal materials and non-metal materials. It can be used for tensile strength test of rebar, concrete reinforced bar, concrete cube, concrete cylinder, etc. It is computer controlled, 6 column, high stiffness. It adopts double test space, upper space for tensile test, lower space for compression, bend test.

 

Applied Standards:

ASTM A730, ASTM E4, ASTM E9, ISO6892, ISO7438, ISO75000-1, EN 10002-4, GB/T228-2002, etc.

 

Technical Specification:

Max. Test load: 3000 kN;

Measurement range of accuracy: 1%-100%;

Testing load accuracy: ±1% of reading value

Control range of stress rate: 1-60MPa/S;

Adjust range of test stress rate: 1N/mm S -60N/mm S ;

Adjust range of test strain rate:0.00025/S-0.0025/S;

Deformation accuracy: ±0.5%;

Displacement accuracy: ±0.5%;

Tensile space: 800mm;

Compression space: 700mm;

Clamping diameter of rebar: φ15-φ80mm;

Clamping thickness of flat specimen: 0-70mm;

Diameter of upper and lower plate: 200mm;

Piston stroke: 250mm;

Span of bending roller: 50-400mm; width of roller: 200mm; diameter of roller: φ50mm

Deformation measurement: extensometer gauge length: 50mm; extension: 25mm;

Power supply: 3-phase 4-wire, 380V, 50 Hz

 

 

 

 

 

 

 



Previous: Model WAW-600E Computer Control Hydraulic Universal Testing Machine  Next: Model WAW-2000E Computer Control Servo Hydraulic Universal Testing Machine