Model TSE-280 Tensile Sample Edge Grinding Machine
Applications:
Tensile sample edge grinder is a device which removes the working hardening zone of the tensile sample due to shearing or stamping according to the national standard GB/T228.1-2010 "Room Temperature Test Method for Tensile Testing of Metal Materials". The device is set according to the length of parallel part of the tensile sample Lc and the radius of transition arc r(r≥20mm). The grinding length and the radius r of the supporting roll are in perfect agreement with the shape of the sample to be grinded, ensuring the processing accuracy of the sample and matching with the punching machine.
Specifications:
Drive mode: Electric;
Abrasive belt size: 2000 x 100 x 1.5 (mm);
Abrasive belt particle: 24 mesh;
Abrasive belt speed: 15m/s;
Feed accuracy: 0.05mm;
Shape tolerance: ≤0.06mm;
Grinding surface: Ra≤0.4;
Sample size: original standard distance 80mm, parallel segment length 120mm;
Holding thickness: not less than 8mm;
Supply voltage: 380V/50HZ;
Automatic collection of dust after grinding;
The equipment has safety protection and emergency stop device.
PRODUCTS
- Electromechanical UTM
- Hydraulic UTM
- Impact Testing Machine
- Fatigue Testing Machine
- Torsion Testing Machine
- Compression Testing Machine
- Bending Testing Machine
- Relaxation Testing Machine
- Creep Testing Machine
- Cupping Testing Machine
- Wood Testing Machine
- Spring Testing Machine
- Friction and Wear Testing Machine
- Plastic Rubber Testing Machine
- Upset Testing Machine
- Customized Testing Machine
- Tensile Sample Preparation
- Testing Machine Accessories
- Hardness Tester
- Hardness Block
- Metallurgical equipment
- Portable Testing Instrument