
MY-1 Spectrum Abrasive Belt Grinding Machine
Grinding is the necessary working procedure before spectral measurement in the preparation of spectrum specimen. MY-1 spectrum abrasive belt grinding machine is made of fully enclosed stainless steel. There is a water tank below the abrasive belt, which could take the dirt into the water so that the work will not pollute the air. It is the new product developed according to numerous market research, many service conditions and merits of different grinding machine. The operational principle: There is a big rolling drum with rubber on the main axle of the electric motor. It drivers the slave drum by abrasive belt. The abrasive belt moves straightly. The sample can be grinded to satisfy the spectral measurement demand on the abrasive belt.
Main Parameters:
Center Distance of Rolling Drum |
310mm |
Width of Abrasive Belt |
100mm |
Length of Abrasive Belt |
920mm |
Opening Size |
80×150mm |
Rotating Speed |
1400r/min (480m/min) |
Electromotor |
Y801-4, 0.55kw, 380V, 50Hz |
Dimensions |
470×480×230mm |
Weight |
55kg |
PRODUCTS
- Electromechanical UTM
- Hydraulic UTM
- Impact Testing Machine
- Fatigue Testing Machine
- Torsion Testing Machine
- Compression Testing Machine
- Bending Testing Machine
- Relaxation Testing Machine
- Creep Testing Machine
- Cupping Testing Machine
- Wood Testing Machine
- Spring Testing Machine
- Friction and Wear Testing Machine
- Plastic Rubber Testing Machine
- Upset Testing Machine
- Customized Testing Machine
- Tensile Sample Preparation
- Testing Machine Accessories
- Hardness Tester
- Hardness Block
- Metallurgical equipment
- Portable Testing Instrument