Analog Double-Needle Shore Hardness Tester
Category: Shore Hardness Tester
Publish Time: 2019-05-02 22:17
Analog Double-Needle Shore Hardness Tester
LX-A-2 Double-needle Type Shore Durometer | |||||||||||||||||||
Shore-A |
|
|
|||||||||||||||||
ITEM NO.:LX-A-2 | Packing Box | ||||||||||||||||||
LX-A-2 Shore A hardness tester is suitable for hardness testing of low and medium hardness plastic, leather, rubber, wax, plural fat. It's according to the national standard GB/T531-2008, reference to specification standard JJG304-2003. | |||||||||||||||||||
Main Characteristics | |||||||||||||||||||
1. Dial scale: 0 ~100HA 2. Needle stroke: 2.5 mm 3. Measure range: 10 ~90HA 4. Needlepoint size: Ф 0.79 mm 5. Dimension:112×60×25mm 5. Weight: 0.2 kg 6. Peak pointers: make it easier to read the maximum scale value directly. |
|||||||||||||||||||
|
|||||||||||||||||||
LX-AO-2 Double-needle Type Shore Durometer | |||||||||||||||||||
|
|||||||||||||||||||
Shore-AO | |||||||||||||||||||
ITEM NO.:LX-AO-2 | Packing Box | ||||||||||||||||||
LX-AO-2 Shore hardness tester is suitable for hardness testing of Vulcanized rubber and thermoplastic rubbers and other materials. It's according to the national standard GB/T531-2008, reference to specification standard JJF1312-2011. | |||||||||||||||||||
Main Characteristics | |||||||||||||||||||
1. Dial scale: 0 ~100AO 2. Needle stroke: 2.5 mm 3. Measure range: 10 ~90AO 4. Needlepoint size: SR 2.5 mm 5. Dimension:112×60×30mm 5. Weight: 0.2 kg 6. Peak pointers: make it easier to read the maximum scale value directly. |
|||||||||||||||||||
LX-D-2 Double-needle Type Shore Durometer | |||||||||||||||||||
|
|||||||||||||||||||
Shore-D | |||||||||||||||||||
ITEM NO.:LX-D-2 | Packing Box | ||||||||||||||||||
LX-D-2 Shore D hardness tester is suitable for hardness testing of high hardness materials such as hard rubber, hard animi resin, thermoplastic rubber, glass, printing plates,fiber, acrylic,etc. The product conforms to GB/T531-2008,reference to specification standard JJG1039-2008. | |||||||||||||||||||
Main Characteristics | |||||||||||||||||||
1. Dial scale: 0 ~100HD 2. Needle stroke: 2.5 mm 3. Measure range: 20 ~ 90HD 4. Needlepoint size: SR 0.1 mm 5. Dimension:112×60×25mm 6. Weight: 0.2 kg 7. Peak pointers: make it easier to read the maximum scale value directly. |
|||||||||||||||||||
LX-C Shore C Microporous Materials Durometer |
|||||||||||||||||||
|
|
||||||||||||||||||
Shore-C | |||||||||||||||||||
ITEM NO.:LX-C | ITEM NO.:LX-C-2 | ||||||||||||||||||
LX-C microporous material hardness tester is suitable for hardness testing of low hardness microporous materials such as foam, sponge, rubber,etc. It reference to specification standard HG/T2489-2007.This instrument applys to hardness measurement of shoe microporous material of which the stress can reach more than 0.5kg/cm ² (0.049MPa) when the compression ratio is 50%. | |||||||||||||||||||
Main Characteristics | |||||||||||||||||||
1. Dial scale: 0 ~100Hc 2. Needle stroke: 0~2.5 mm 3. Measure range: 10 ~ 90Hc 4. Measuring error: ±1Hc 5. Dropper tip pressure: F=0,0784Hc+0.539(N) 5. Dimension:112×60×30mm 6. Weight: 0.2kg |
PRODUCTS
- Electromechanical UTM
- Hydraulic UTM
- Impact Testing Machine
- Fatigue Testing Machine
- Torsion Testing Machine
- Compression Testing Machine
- Bending Testing Machine
- Relaxation Testing Machine
- Creep Testing Machine
- Cupping Testing Machine
- Wood Testing Machine
- Spring Testing Machine
- Friction and Wear Testing Machine
- Plastic Rubber Testing Machine
- Upset Testing Machine
- Customized Testing Machine
- Tensile Sample Preparation
- Testing Machine Accessories
- Hardness Tester
- Hardness Block
- Metallurgical equipment
- Portable Testing Instrument